Taiwan's
leading Manufacturer of Speed Reducer, Gear box, AC and DC Motor, and worm gear, stepless, permanent magnet, induction, reversible motors.
Speed Control Motor, Electromagnetic Motor, Gearmotor, Linear Motor, Hollow-worm Gear Motor, Planetary Gear Reducer, DC Motor, AC Motor, Frequency Converter
|
>>Various
Types of Motors |
|
|
| TRKF
Servo Speed Reduction Device |
|
| |
Decelerator:
1. Assembling method for clipping tightly
(direct shaft without key)
Insert
the servomotor into the decelerator shaft and tighten the fixed screw. Assembling
method for clipping tightly the motor shaft (as the following figure)
(For tightening power, refer to the
following list)
|
Type |
TR F |
| Motor
capacity | 50W~100W |
200~750W |
1000W |
| Tightening
screw | M3 |
M4 |
M5 |
| Tightening
power N-m | 0.98 |
2.94 |
3.92 |
*1500W above
will be provided with key-type.
*TRCF, due to its special assembling method,
must be assembled with the motor by us, so please provide the motor.
| |
| |
| | |
2.
Hollow shaft direct type (direct shaft with a key)
Insert
the servomotor into the hollow shaft of the decelerator and tighten the fixed
screw on the key.
Note:
1.
When the decelerator and the motor are to be connected, the motor shaft should
be smeared with rust-resistant agent and fix the motor shaft key with the fixed
screw. The key should use a JIS BB01-1996 key
2. The input flange and the motor
shaft size, because their brands and types are different, are different in size
as well.
*At
ordering please address the brand, model and power of the motor.
| |
| | TOP
| |
