| Features:
(1) At low speeds the torque increases and the efficiency
is enhanced
The KIMPO-DISCO stepless gearbox, with an input capacity
of 0.18~22kw, can tolerate any special environment such as overload, pounding
load and reactionary load, for the transmission of the torque is done by several
sets of inclined planetary pieces. At low speeds because the track of a planetary
piece is enlarged and the arm is increased, the torque increases and the efficiency
is enhanced.
(2) All-sealed mechanical speed-change
The
KIMPO-DISCO stepless gearbox changes its speeds by mechanical means and is sealed
fully within the frame in such that in a special place such as one subject to
explosion, flammability, dust, acidity or alkalinity or humidity, if only the
motor is chosen appropriately it can adapt to the environment without any danger
and the use life is particularly long.
(3) Stability:
the fluctuation of the speeds is within 0.01%
Another feature of
the mechanical speed-change is speed stability and low variation. Any assembly
of a planetary piece is equipped with a pressure-adjustment device so that the
speed stability will not lose accuracy on account of an increase in environmental
temperatures or of long use.
(4) Small size, low weight
and excellent interface features
KIMPO-DISCO can provide 1 HP from
a body of 152mm long; small size and low weight. Moreover, vertical, horizontal
or twin-axis type can fit into the integral moving system. It can also apply to
a single motor to drive for reducing cost and failure, enhancing the features
of the integral moving system. As a result, the application of twin-axis type
is a must.
(5) Easy operation for speed-change
By
using the operational wheel the speed change is simple and easy. In operation,
whenever in load status or not, the speed-change can be done fast and precisely
and each type of remote control can be installed additionally together with P.L.D.
for automatic control.
(6) A wide range of applications
Any
speeds can be specified and any angle can be installed without being limited by
the speed-change of the input axis. And it can also go along with the use of each
type of motor and decelerator. |
